NSN 5306-01-264-5844
Shouldered Rivet Ring Bolt
About this product
Between 0.507 inches and 0.515 inches eye inside diameter, 3.250 inches shank length, between 0.493 inches and 0.500 inches eye stock diameter, thread diameter: 0.500 inches.
Manufacturer part number 12313435-3 for national stock number 5306012645844.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-264-5844.
-
MPN or Model
12313435-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Left-hand -
Thread Length
3.250 inches -
Eye Inside Diameter
Between 0.507 inches and 0.515 inches -
Shank Length
3.250 inches -
Eye Stock Diameter
Between 0.493 inches and 0.500 inches -
Overall Length
4.220 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Distance From Center Of Eye To Shank End
3.750 inches -
Material
Steel comp 1010 or steel comp 1011 or steel comp 1013 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020 or steel comp 1021 or steel comp 1022 or steel comp 1023 or steel comp 1524 or steel comp 1025 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Style Designator
Round, closed -
Thread Series Designator
Unc
More from these suppliers
- 5930-00-136-1834 MPN 11611504Push Switch
- 4820-00-179-3423 MPN 7334985Pressure And Temperature Relief Valve
- 5935-00-854-4447 MPN 8683490Receptacle Assembly
- 5935-00-946-8346 MPN 10950812Electrical Connector Assembly
- 4820-01-093-8313 MPN 12286718Safety Relief Valve
- 5935-01-117-3272 MPN 12311890-29Electrical Plug Connector Body
- 5940-01-285-9843 MPN 12345232Terminal Board Assembly
- 5935-01-496-8656 MPN 12477381Electrical Connector Assembly
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-264-5844 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12313435-3 | U S Army Tank Automotive Command |
Stock Check
Availability for this item was last checked on 10/22/20.
The quantities and conditions available at the time were:
- NE: 6
- NS: 1