NSN 5306-01-266-7312
Wheel Bolt
Between 0.990 inches and 1.010 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS9784-14 for national stock number 5306012667312.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-266-7312.
-
MPN or Model
MS9784-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.740 inches and 0.820 inches -
Fastener Length
Between 0.990 inches and 1.010 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.190 inches and 0.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Minimum Yield Strength
120000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-031-4242 MPN MS27480T20C16PElectrical Plug Connector
- 5950-00-053-8245 MPN MS75008-26Radio Frequency Coil
- 5935-00-137-0959 MPN MS27484T8B98SElectrical Plug Connector
- 5905-00-141-1268 MPN MS35043-92Composition Fixed Resistor
- 5935-00-149-3381 MPN MS3100A10SL4PElectrical Receptacle Connector
- 5935-00-153-7455 MPN MS18168-2YElectrical Receptacle Connector
- 5935-00-259-7436 MPN MS3106A32-101PElectrical Plug Connector
- 5935-00-295-3315 MPN MS3108B20-33PElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-266-7312 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9784-14 | Military Standards |