NSN 5306-01-266-7314
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.062 inches shoulder thickness, between 0.516 inches and 0.562 inches shank length, eye stock thickness: between 0.089 inches and 0.099 inches .
Manufacturer part number AN42C4 for national stock number 5306012667314.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-266-7314.
-
MPN or Model
AN42C4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3 -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.062 inches -
Shank Length
Between 0.516 inches and 0.562 inches -
Eye Stock Thickness
Between 0.089 inches and 0.099 inches -
Shoulder Diameter
0.438 inches -
Shank Unthreaded Hole Diameter
0.060 inches first hole and 0.080 inches first hole -
Overall Length
1.187 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
0.937 inches -
Distance From Threaded End To Shank Hole Center
0.140 inches first hole -
Eye Outside Width
0.438 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6514 MPN NAS1063A5-447Terminal Board Marker Strip
- 5940-01-451-2574 MPN NAS1063C3-539CTerminal Board Marker Strip
- 5940-01-633-7510 MPN SAE81824/6Conductor Splice
- 5305-00-040-9560 MPN NAS1081-0202Setscrew
- 5305-00-052-6871 MPN MS24627-48Tapping Screw
- 5305-00-055-2797 MPN MS24673-9Socket Head Cap Screw
- 5305-00-068-0518 MPN MS35190-301Machine Screw
- 5305-00-150-9263 MPN MILS7839Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-266-7314 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN42C4 | National Aerospace Standards |
AN42C4 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.