NSN 5306-01-266-8303
Wheel Bolt
Between 6.328 inches and 6.375 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN8-62A for national stock number 5306012668303.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-266-8303.
-
MPN or Model
AN8-62A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.650 inches and 0.828 inches -
Fastener Length
Between 6.328 inches and 6.375 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 5.547 inches and 5.578 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-009-9193 MPN NAS1218-06E2Machine Screw
- 5305-00-052-0524 MPN MS24678-54CSocket Head Cap Screw
- 5305-00-069-2198 MPN NAS1505-13Close Tolerance Screw
- 5305-00-069-5578 MPN MS90725-94Hexagon Head Cap Screw
- 5305-00-071-2538 MPN MS24694S192Machine Screw
- 5305-00-102-3007 MPN NAS1218-3-9PMachine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-266-8303 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN8-62A | National Aerospace Standards |
AN8-62A | Aeronautical Standards Group |