NSN 5306-01-269-6886
Close Tolerance Hex Head Bolt
Between 0.496 inches and 0.526 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS7403-3 for national stock number 5306012696886.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-269-6886.
-
MPN or Model
NAS7403-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.318 inches and 0.328 inches -
Fastener Length
Between 0.496 inches and 0.526 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams6322 assn standard 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-439-9041 MPN NAS1063A8-98AKTerminal Board Marker Strip
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-008-9114 MPN NAS1190C02T6LSocket Head Cap Screw
- 5305-00-054-6677 MPN NAS1635&08&28Machine Screw
- 5305-00-057-9583 MPN MS35199-4Machine Screw
- 5305-00-058-2068 MPN MS24677-10Socket Head Cap Screw
- 5305-00-078-0186 MPN NAS602-9BMachine Screw
- 5305-00-115-9526 MPN MS90725-58Hexagon Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-269-6886 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7403-3 | National Aerospace Standards |