NSN 5306-01-270-1699
Wheel Bolt
Between 2.969 inches and 3.031 inches fastener length, hexagon head style, between 0.195 inches and 0.211 inches head height, width between flats: between 0.484 inches and 0.500 inches .
Manufacturer part number MS16208-38 for national stock number 5306012701699.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-270-1699.
-
MPN or Model
MS16208-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093460 - Bolts/nuts NOI Bbc/zinc -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.874 inches -
Fastener Length
Between 2.969 inches and 3.031 inches -
Head Style
Hexagon -
Head Height
Between 0.195 inches and 0.211 inches -
Width Between Flats
Between 0.484 inches and 0.500 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 310 or steel comp 316 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5940-01-660-0086 MPN NAS1063Terminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-054-6652 MPN MS51957-28Machine Screw
- 5305-00-107-9308 MPN NAS1633E28Machine Screw
- 5305-00-121-8895 MPN MS27577-4-18Close Tolerance Screw
- 5305-00-213-8780 MPN MS35308-377Hexagon Head Cap Screw
- 5305-00-224-0566 MPN NAS1102-08-58Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-270-1699 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS16208-38 | National Aerospace Standards |
MS16208-38 | Military Standards |