NSN 5306-01-270-1716
Coaxial Connector
Between 1.509 inches and 1.539 inches fastener length, spline extended washer head style, between 0.237 inches and 0.287 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21296-05014 for national stock number 5306012701716.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-270-1716.
-
MPN or Model
MS21296-05014
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.541 inches and 0.674 inches -
Fastener Length
Between 1.509 inches and 1.539 inches -
Head Style
Spline extended washer -
Head Height
Between 0.237 inches and 0.287 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.065 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837 ty2 cl2 federal standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5940-01-442-4218 MPN NAS1063A2-TB107DCTerminal Board Marker Strip
- 1680-01-532-3065 MPN NAS77A6-050NAirc Sleeve Bushing
- 5305-00-007-3020 MPN NAS1102E02-4PMachine Screw
- 5305-00-008-3701 MPN NAS1122-9Close Tolerance Screw
- 5305-00-068-5398 MPN NAS1351C3H6Socket Head Cap Screw
- 5305-00-151-5661 MPN MS27039-6-20Machine Screw
- 5305-00-208-6183 MPN MS24677-98Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-270-1716 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21296-05014 | National Aerospace Standards |
MS21296-05014 | Military Standards |