NSN 5306-01-273-6235
Wheel Bolt
Between 2.932 inches and 2.962 inches fastener length, spline drive shear head head style, 0.539 inches head height, shank unthreaded hole diameter: 0.141 inches first hole.
Manufacturer part number VCG0009S18D-32 for national stock number 5306012736235.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-273-6235.
-
MPN or Model
VCG0009S18D-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.922 inches and 0.972 inches -
Fastener Length
Between 2.932 inches and 2.962 inches -
Head Style
Spline drive shear head -
Head Height
0.539 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Head Minor Diameter
1.715 inches -
Thread Diameter
1.125 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.648 inches first hole and 2.678 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-170-8489 MPN LD111-0044-2411Close Tolerance Screw
- 5305-01-435-5861 MPN BACB30LU8-66Close Tolerance Screw
- 5305-01-591-2238 MPN ST3M557-6-27Close Tolerance Screw
- 5306-00-435-5827 MPN STSBG002A08U020Shear Bolt
- 5306-00-486-3020 MPN VAL23029-6-8Close Tolerance Bolt
- 5306-01-142-1490 MPN ST3M507-4-2Shoulder Bolt
- 5306-01-188-6841 MPN VCG0001-4D12Close Tolerance Bolt
- 5306-01-334-0519 MPN VAL23009-4D010Shear Bolt
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-273-6235 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0009S18D-32 | Valley-todeco, Inc. |
PBF7521S18D32 | Sps Technologies, Llc |
120978S18-D32 | Sps Technologies, Llc |
AIC596S18D32 | Sps Technologies, Llc |
C7521S18D32 | Lockheed Martin Corporation |
VS3133S18D32 | Arconic Global Fasteners & Rings, |
H411S18D-32 | Huck International, Inc. |
C7521S18D32 | Sps Technologies, Llc |
H411S18D-32 | Huck Intl Inc |
VS3133S18D32 | Alcoa Global Fasteners, Inc. |