NSN 5306-01-274-7279
Wheel Bolt
Between 3.578 inches and 3.625 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN8C34 for national stock number 5306012747279.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-274-7279.
-
MPN or Model
AN8C34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.437 inches and 0.516 inches -
Fastener Length
Between 3.578 inches and 3.625 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 3.109 inches and 3.141 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.421 inches first hole -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-262-7839 MPN AN3108A20-29SElectrical Plug Connector
- 4820-00-341-2987 MPN AN6245B4Safety Relief Valve
- 5935-00-549-4966 MPN AN3102E28-21PElectrical Receptacle Connector
- 5935-00-644-6970 MPN AN3106A18-13PElectrical Plug Connector
- 5935-00-644-6973 MPN AN3106A16S8SXElectrical Plug Connector
- 5935-01-048-0080 MPN AN3106A24-7SElectrical Plug Connector
- 5305-00-156-2686 MPN AN500AC10-12Machine Screw
- 5305-00-206-0541 MPN AN515-4-5Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-274-7279 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN8C34 | Aeronautical Standards Group |