NSN 5306-01-276-7159
Coaxial Connector
Between 3.329 inches and 3.359 inches fastener length, spline extended washer head style, between 1.390 inches and 1.410 inches head height, extended washer diameter: between 2.345 inches and 2.355 inches .
Manufacturer part number VS2003M6-20 for national stock number 5306012767159.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-276-7159.
-
MPN or Model
VS2003M6-20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.829 inches and 0.859 inches -
Fastener Length
Between 3.329 inches and 3.359 inches -
Head Style
Spline extended washer -
Head Height
Between 1.390 inches and 1.410 inches -
Extended Washer Diameter
Between 2.345 inches and 2.355 inches -
Extended Washer Thickness
Between 0.308 inches and 0.328 inches -
Grip Diameter
Between 1.247 inches and 1.249 inches -
Head Minor Diameter
1.842 inches -
Thread Diameter
1.250 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
12 -
Material
Steel -
Material Specification
Ams6485 mfr ref single material response -
Thread Series Designator
Unjf -
Specification Data
92215-vs2003-6-20 manufacturers standard
More from these suppliers
- 5305-00-083-3350 MPN HT8138-4-5TClose Tolerance Screw
- 5305-00-106-6272 MPN NAS1221-06-5PClose Tolerance Screw
- 5305-00-143-9689 MPN NAS1146-12Close Tolerance Screw
- 5305-00-150-0804 MPN NAS1131E8Close Tolerance Screw
- 5305-00-364-9543 MPN CHT4025-3-6Close Tolerance Screw
- 5305-00-441-0198 MPN VS2545T7F84Close Tolerance Screw
- 5305-00-929-4071 MPN NAS1125C6HClose Tolerance Screw
- 5305-01-160-7561 MPN HT4024L5-18-1Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-276-7159 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2003M6-20 | Alcoa Global Fasteners, Inc. |
VS2003M6-20 | Safran Landing Systems |
Stock Check
- NE: 14
- NS: 5