NSN 5306-01-277-4985
Coaxial Connector
1.072 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number SS5025-05-008 for national stock number 5306012774985.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-277-4985.
-
MPN or Model
SS5025-05-008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.572 inches -
Fastener Length
1.072 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp e4340 or steel comp h11 -
Material Specification
Mil-s-5000 military specification 1st material response or a ms 6485 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-064-0248 MPN 65209-02091-102Prob Retaining Ring
- 1560-00-065-7248 MPN S6135-64013-2Drive Shaft Coupling Flange
- 1680-00-246-5986 MPN 65407-05067-101Positioner Plunger
- 1560-00-348-9932 MPN S14-35-4366Generator Main Gear
- 1560-00-591-6594 MPN S1640-61272-1Control Support
- 1560-00-723-7361 MPN SS4014DD7-8-0174-0Tetrafluo Hose Assy
- 1560-00-840-1341 MPN S6122-87615-8Tank Fuel Support
- 1560-00-858-5761 MPN S6122-86150-4Horizontal Stabilizer
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-277-4985 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5025-05-008 | Sikorsky Aircraft Corporation |