NSN 5306-01-277-9904
Coaxial Connector
Chamfer on threaded end at 60.0 deg angle.
Manufacturer part number MS21250-10-034 for national stock number 5306012779904.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-277-9904.
-
MPN or Model
MS21250-10-034
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.899 inches and 0.939 inches -
Fastener Length
Between 3.034 inches and 3.054 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.608 inches and 0.628 inches -
Width Between Flats
Between 0.678 inches and 0.698 inches -
Extended Washer Diameter
Between 1.040 inches and 1.050 inches -
Extended Washer Thickness
Between 0.140 inches and 0.160 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-207-0224 MPN BACB30NN3K7Close Tolerance Screw
- 5305-01-303-5634 MPN 3M1034C4-10-21Close Tolerance Screw
- 5305-01-364-8277 MPN BACS12CK08U14Machine Screw
- 5305-01-435-5864 MPN BACB30LU8-64Close Tolerance Screw
- 5306-00-003-6860 MPN BACB30LM3U8Shear Bolt
- 5306-00-958-9156 MPN VFK100G-06026Shear Bolt
- 5306-01-044-2983 MPN VAL23607-3-36Shoulder Bolt
- 5306-01-044-7447 MPN ST3M497-5-8Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-277-9904 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-10-034 | Valley-todeco, Inc. |
MS21250-10-034 | Sps Technologies, Llc |
MS21250-1-0-034 | Arconic Global Fasteners & Rings, |
MS21250-10-034 | Sps Technologies, Llc |
MS21250-10-034 | Huck International, Inc. |
MS21250-10-034 | Sps Technologies, Llc |
MS21250-10-034 | All Manufacturers, Inc. |
MS21250-10-034 | Hi-shear Corporation |
NASM21250-10035 | National Aerospace Standards |
MS21250-10-034 | Alcoa Global Fasteners, Inc. |
MS21250-10-034 | Textron Fastening Systems |
MS21250-10-034 | Lisi Aerospace Canada Corp |
VFK100G-10-034 | Valley-todeco, Inc. |
MS21250-10-034 | Alcoa Fastening Systems |
MS21250-10-034 | National Aerospace Standards |
MS21250-10-034 | Military Standards |
MS21250-10-034 | Mercury Aerospace Fasteners Inc |