NSN 5306-01-279-2325
Wheel Bolt
Between 4.453 inches and 4.500 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN5C43A for national stock number 5306012792325.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-279-2325.
-
MPN or Model
AN5C43A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.499 inches and 0.578 inches -
Fastener Length
Between 4.453 inches and 4.500 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 3.922 inches and 3.954 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-541-9615 MPN NAS312C26-1192Control Cable Assembly
- 5305-00-051-5906 MPN NAS333C5Close Tolerance Screw
- 5305-00-058-9374 MPN MS51977-41Setscrew
- 5305-00-068-0476 MPN MS35199-73Machine Screw
- 5305-00-068-8432 MPN MS24667-10Socket Head Cap Screw
- 5305-00-081-9923 MPN NAS1189-3P8LSocket Head Cap Screw
- 5305-00-119-7448 MPN NAS1635-08LL16Socket Head Cap Screw
- 5305-00-145-1007 MPN NAS1125-27Close Tolerance Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-279-2325 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN5C43A | National Aerospace Standards |
AN5C43A | Aeronautical Standards Group |