NSN 5306-01-280-5732
Coaxial Connector
Between 2.409 inches and 2.429 inches fastener length, double hexagon w/hole head style, between 0.608 inches and 0.628 inches head height, width between flats: between 0.672 inches and 0.687 inches .
Manufacturer part number C5078345-1 for national stock number 5306012805732.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-280-5732.
-
MPN or Model
C5078345-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.337 inches -
Fastener Length
Between 2.409 inches and 2.429 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.608 inches and 0.628 inches -
Width Between Flats
Between 0.672 inches and 0.687 inches -
Extended Washer Diameter
Between 1.040 inches and 1.050 inches -
Extended Washer Thickness
Between 0.140 inches and 0.160 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 1.050 inches and 1.070 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-01-130-5397 MPN 5068963-001Power Transformer
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-280-5732 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C5078345-1 | Signals Warfare Project Manager |