NSN 5306-01-281-7657
Coaxial Connector
Because of material and plating,bolt is identified w/red dye or paint on the thread end.
Manufacturer part number NAS4604-10 for national stock number 5306012817657.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-281-7657.
-
MPN or Model
NAS4604-10
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.980 inches and 1.010 inches -
Head Style
Flat countersunk -
Head Diameter
0.508 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
95000 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-057-4124 MPN NAS1389-3Conductor Splice
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-032-3697 MPN NAS1352-08LL10PSocket Head Cap Screw
- 5305-00-053-1087 MPN MS35199-59Machine Screw
- 5305-00-115-9358 MPN NAS514P440-9Machine Screw
- 5305-00-121-8895 MPN MS27577-4-18Close Tolerance Screw
- 5305-00-151-2524 MPN MILS7839Machine Screw
- 5305-00-151-5750 MPN NAS1101E06-14BMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-281-7657 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4604-10 | National Aerospace Standards |
NAS4604-10 | National Aerospace Standards |
NAS4604-10 | National Aerospace Standards |
NAS4604-10 | National Aerospace Standards |
NAS4604-10 | National Aerospace Standards |
NAS4604-10 | National Aerospace Standards |
NAS4604-10 | National Aerospace Standards |
NAS4604-10 | National Aerospace Standards |
NAS4604-10 | National Aerospace Standards |