NSN 5306-01-282-2345
Wheel Bolt
Between 4.765 inches and 4.812 inches fastener length, hexagon head style, between 0.203 inches and 0.234 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS20074-04-46 for national stock number 5306012822345.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-282-2345.
-
MPN or Model
MS20074-04-46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.499 inches and 0.578 inches -
Fastener Length
Between 4.765 inches and 4.812 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.234 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
Between 0.065 inches and 0.075 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 4.234 inches and 4.266 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-067-4749 MPN MS91189-25Radio Frequency Coil
- 5935-00-121-4992 MPN MS3456KT20-7SElectrical Plug Connector
- 5940-00-143-4777 MPN MS25036-57Lug Terminal
- 5935-00-149-2901 MPN MS3106A14S7PElectrical Plug Connector
- 5935-00-168-4484 MPN MS3115-12BReceptacle Dummy Connector
- 5935-00-185-5020 MPN MS3102R32-10SElectrical Receptacle Connector
- 5905-00-192-3990 MPN MS90194-89Composition Fixed Resistor
- 5935-00-192-6336 MPN MS3106F014S-7SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-282-2345 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS20074-04-46 | Military Standards |