NSN 5306-01-282-2363
Wheel Bolt
Between 1.052 inches and 1.072 inches fastener length, hexagon head style, between 0.240 inches and 0.260 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS9584-15 for national stock number 5306012822363.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-282-2363.
-
MPN or Model
MS9584-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.740 inches and 0.820 inches -
Fastener Length
Between 1.052 inches and 1.072 inches -
Head Style
Hexagon -
Head Height
Between 0.240 inches and 0.260 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
Between 0.060 inches and 0.080 inches -
End Application
Spec item -
Thread Diameter
0.250 inches -
Grip Length
Between 0.252 inches and 0.312 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon longitudinal hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-009-3157 MPN MS3476L20-41SElectrical Plug Connector
- 5935-00-024-0616 MPN MS18162-2WElectrical Receptacle Connector
- 5935-00-093-0818 MPN MS27497E12A98PAElectrical Receptacle Connector
- 5935-00-103-7482 MPN MS27497E24A61SAElectrical Receptacle Connector
- 5940-00-143-4777 MPN MS25036-57Lug Terminal
- 5940-00-329-5760 MPN MS21980-187Grounding Metallic Shielded Cable Ferrule
- 5935-00-332-0970 MPN MS27473T14B35PElectrical Plug Connector
- 5935-00-411-1977 MPN MS3103-20-24PElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-282-2363 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9584-15 | Military Standards |
MS9584-15 | Military Standards |