NSN 5306-01-282-9258
Wheel Bolt
Between 4.865 inches and 4.885 inches fastener length, hexagon head style, between 0.209 inches and 0.229 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number MS9786-49 for national stock number 5306012829258.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-282-9258.
-
MPN or Model
MS9786-49
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.990 inches and 1.070 inches -
Fastener Length
Between 4.865 inches and 4.885 inches -
Head Style
Hexagon -
Head Height
Between 0.209 inches and 0.229 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 3.815 inches and 3.875 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Minimum Yield Strength
120000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-013-8904 MPN MS28882-32Check Valve
- 5935-00-109-0147 MPN MS21097/5-03Electrical Receptacle Connector
- 5905-00-113-4856 MPN MS35043-46Composition Fixed Resistor
- 5935-00-140-3205 MPN MS27473E20A2SElectrical Plug Connector
- 5935-00-148-9287 MPN MS3108B24-12SElectrical Plug Connector
- 5940-00-197-8709 MPN MS21003-20Lug Terminal
- 5935-00-328-0029 MPN MS27497E16B55PElectrical Receptacle Connector
- 5935-00-369-6431 MPN MS24265H14B7ENElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-282-9258 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9786-49 | Military Standards |