NSN 5306-01-283-3597
Coaxial Connector
Between 3.531 inches and 3.578 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.552 inches and 0.564 inches .
Manufacturer part number NAS464-6-51 for national stock number 5306012833597.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-283-3597.
-
MPN or Model
NAS464-6-51
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.333 inches and 0.400 inches -
Fastener Length
Between 3.531 inches and 3.578 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.552 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 3.178 inches and 3.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas464 professional/industrial association standard
More from these suppliers
- 5940-01-451-2579 MPN NAS1063C5-540CTerminal Board Marker Strip
- 1560-01-423-0215 MPN NAS6706D19Aircraft Structural Component Support
- 1680-01-649-0944 MPN 284A2203-10Box Assembly
- 5305-00-008-9114 MPN NAS1190C02T6LSocket Head Cap Screw
- 5305-00-023-5867 MPN NAS602-2Machine Screw
- 5305-00-057-0506 MPN MS51958-9Machine Screw
- 5305-00-058-9358 MPN MS51977-3Setscrew
- 5305-00-079-2824 MPN NAS1101C4-10Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-283-3597 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-6-51 | National Aerospace Standards |