NSN 5306-01-284-0841
Coaxial Connector
Between 1.126 inches and 1.173 inches fastener length, double hexagon head style, 0.328 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number EWSB22-9-A8 for national stock number 5306012840841.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-284-0841.
-
MPN or Model
EWSB22-9-A8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.616 inches and 0.683 inches -
Fastener Length
Between 1.126 inches and 1.173 inches -
Head Style
Double hexagon -
Head Height
0.328 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5607 inches and 0.5616 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.562 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-298-2766 MPN 239802Machine Screw
- 5305-00-354-4584 MPN HT4024L3-8Close Tolerance Screw
- 5305-01-004-9497 MPN 106751-06-215CMachine Screw
- 5305-01-119-7188 MPN BACB30LU4-24Close Tolerance Screw
- 5305-01-181-5023 MPN 38031-4C16Socket Head Cap Screw
- 5305-01-330-7089 MPN 123992-5-5AClose Tolerance Screw
- 5305-01-382-5951 MPN 522571-6Setscrew
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-284-0841 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-9-A8 | Sps Technologies, Llc |