NSN 5306-01-286-0872
Coaxial Connector
Between 0.897 inches and 0.944 inches fastener length, hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number PBF1308-5-9 for national stock number 5306012860872.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-286-0872.
-
MPN or Model
PBF1308-5-9
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.325 inches and 0.392 inches -
Fastener Length
Between 0.897 inches and 0.944 inches -
Head Style
Hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r56400 -
Material Specification
Nas 621 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-003-9064 MPN A51B92193-11Cowling Intake Duct
- 1560-00-003-9086 MPN 128EC60048-15Aircraft Thermal Insulation Pipe Covering
- 5985-00-003-9150 MPN A51A9052-9Directional Coupler
- 1560-00-006-0568 MPN A51B92699-12Pin Latch Cover
- 1560-00-006-4645 MPN A51B92478-12Aircraft Access Cover
- 5930-00-027-4010 MPN GS839DK3ASensitive Switch
- 1560-00-030-5775 MPN 37E55500-1-1Aircraft Access Door
- 1560-00-075-3755 MPN 123CM10021-3Flight Controls Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-286-0872 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1308-5-9 | Sps Technologies, Llc |
GB511CE5-9 | Northrop Grumman Systems Corporation |
110671-5-9 | Sps Technologies, Llc |
PBF1308-5-9 | Sps Technologies, Llc |
GB511CE5-9 | Northrop Grumman Systems Corporation |
110671-5-9 | Sps Technologies, Llc |