NSN 5306-01-286-6040
Coaxial Connector
Between 1.189 inches and 1.219 inches fastener length, spline drive shear head head style, 0.210 inches head height, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number AIC596-6-12 for national stock number 5306012866040.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-286-6040.
-
MPN or Model
AIC596-6-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.479 inches -
Fastener Length
Between 1.189 inches and 1.219 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Head Minor Diameter
Between 0.578 inches and 0.585 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-279-1254 MPN BACB30NN3K2Close Tolerance Screw
- 5305-01-417-2491 MPN 3M1169V4-19AClose Tolerance Screw
- 5305-01-462-2724 MPN 3M1169V3-10AClose Tolerance Screw
- 5305-01-496-1417 MPN TX1024C4D34-6AClose Tolerance Screw
- 5306-00-298-2862 MPN MS21250-08046Shear Bolt
- 5306-00-541-9490 MPN VAL23029-6D19Close Tolerance Bolt
- 5306-01-030-1761 MPN VAL23029-3-24Close Tolerance Bolt
- 5306-01-043-0549 MPN VCD0020-6-20DShear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-286-6040 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC596-6-12 | Sps Technologies, Llc |
C7521-6-12 | Lockheed Martin Corporation |
C7521-6-12 | Valley-todeco, Inc. |
VS3133-6-12 | Arconic Global Fasteners & Rings, |
C7521-6-12 | Huck International, Inc. |
C7521-6-12 | Sps Technologies, Llc |
C7521-6-12 | Sps Technologies, Llc |
C7521-6-12 | Alcoa Global Fasteners, Inc. |
VS3133-6-12 | Alcoa Global Fasteners, Inc. |
VCG0009-6-12 | Valley-todeco, Inc. |
SF118-6-12 | Saturn Fasteners Inc |
H411-6-12 | Huck International, Inc. |
PBF7521-6-12 | Sps Technologies, Llc |
120978-6-12 | Sps Technologies, Llc |
VS3133-6-12 | Tactair Fluid Controls, Inc. |