NSN 5306-01-286-9183
Close Tolerance Hex Head Bolt
Between 2.072 inches and 2.102 inches fastener length, double hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number LD111-0026-0823 for national stock number 5306012869183.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-286-9183.
-
MPN or Model
LD111-0026-0823
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.624 inches and 0.674 inches -
Fastener Length
Between 2.072 inches and 2.102 inches -
Head Style
Double hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-030-5295 MPN 187-14480-1Aircraft Tip
- 1680-01-006-3039 MPN 65E34283-13Aircraft Seat Webbing Assembly
- 1560-01-173-8637 MPN L1700019-013Aircraft Structural Component Bracket
- 1560-01-173-8651 MPN L1700019-008Aircraft Structural Component Bracket
- 1560-01-173-9703 MPN L1700008-007Aircraft Structural Component Support
- 1560-01-215-7996 MPN L3058123-012Aft Fairing Seal
- 5935-01-251-2380 MPN LE414-0012-0002Electrical Receptacle Connector
- 1560-01-262-4310 MPN L3058059-043Aircraft Fairing
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-286-9183 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0026-0823 | Boeing Company, The |