NSN 5306-01-287-6619
Close Tolerance Hex Head Bolt
Between 2.781 inches and 2.801 inches fastener length, double hexagon extended washer head style, between 0.328 inches and 0.348 inches head height, width between flats: 0.375 inches .
Manufacturer part number J835P031A for national stock number 5306012876619.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-287-6619.
-
MPN or Model
J835P031A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.776 inches and 0.806 inches -
Fastener Length
Between 2.781 inches and 2.801 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.328 inches and 0.348 inches -
Width Between Flats
0.375 inches -
Extended Washer Diameter
Between 0.490 inches and 0.510 inches -
Extended Washer Thickness
0.070 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.995 inches and 2.005 inches -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
63.0 microinches bearing surface of head -
Material
Nickel alloy uns n07001 -
Material Specification
Ams 5708 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-085-7773 MPN 21C2206-021Holding Pad
- 4920-00-111-2979 MPN 21C1396G001 Assembling Fixture
- 4920-00-212-3413 MPN 11C1052P1Interface Device Adapter Assembly
- 4920-00-413-6467 MPN 1C5811G01Aircraft Engine Maintenance Fixture
- 4920-00-510-3110 MPN 1C2447Dynamic B Cartridge
- 4920-00-698-7141 MPN 1C2601-16Aircraft Engine Maintenance Fixture
- 4920-00-829-9801 MPN 1C3914G1Wrench Adapter Set
- 5930-00-847-0037 MPN 874C224P2Pressure Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-287-6619 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J835P031A | General Electric Company |