NSN 5306-01-288-1393
Wheel Bolt
Between 2.240 inches and 2.260 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS9489-30 for national stock number 5306012881393.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-288-1393.
-
MPN or Model
MS9489-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.620 inches and 0.700 inches -
Fastener Length
Between 2.240 inches and 2.260 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.560 inches and 1.620 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-009-3083 MPN MS27506B9-1Electrical Connector Cable Clamp
- 5935-00-015-0124 MPN MS3106R36-10SElectrical Plug Connector
- 4820-00-063-6450 MPN MS28771Check Valve
- 5935-00-090-7185 MPN MS3102R36-52SWElectrical Receptacle Connector
- 5905-00-100-4969 MPN MS35353-38Wire Wound Fixed Resistor
- 5930-00-110-0348 MPN MS24613C222Toggle Switch
- 5935-00-160-4754 MPN MS3102K18-8SElectrical Receptacle Connector
- 5935-00-175-4421 MPN MS27473E14B18SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-288-1393 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9489-30 | Military Standards |