NSN 5306-01-288-1419
Close Tolerance Hex Head Bolt
Between 1.784 inches and 1.804 inches fastener length, double hexagon extended washer head style, between 0.373 inches and 0.393 inches head height, width between flats: 0.437 inches .
Manufacturer part number J836P014A for national stock number 5306012881419.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-288-1419.
-
MPN or Model
J836P014A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.842 inches and 0.872 inches -
Fastener Length
Between 1.784 inches and 1.804 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.373 inches and 0.393 inches -
Width Between Flats
0.437 inches -
Extended Washer Diameter
Between 0.552 inches and 0.572 inches -
Extended Washer Thickness
0.090 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.932 inches and 0.942 inches -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
63.0 microinches bearing surface of head -
Material
Nickel alloy uns n07001 -
Material Specification
Ams 5708 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-113-6070 MPN 21C2344P011Rear Bearin Adapter
- 4920-00-147-3696 MPN 1C6296G01Aircraft Engine Maintenance Fixture
- 4920-00-224-2465 MPN 1C5749P06Container Set Lid
- 4920-00-571-8962 MPN 21C1106G001Drive Protector
- 4920-00-713-2261 MPN 21C679G1Tur Protector Cover
- 4920-00-936-0266 MPN 21C2795G001Aircraft Engine Test Facility Bellmouth Assembly
- 4920-01-008-1532 MPN 21C3887G02Variable Exhaust Nozzle S Tester
- 4920-01-091-2892 MPN 21C8134G01Plug Adapter
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-288-1419 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J836P014A | General Electric Company |