NSN 5306-01-288-3764
Wheel Bolt
1.250 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS9584-18 for national stock number 5306012883764.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-288-3764.
-
MPN or Model
MS9584-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.810 inches -
Fastener Length
1.250 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.440 inches and 0.500 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon longitudinal hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-021-9511 MPN MS3112E12-3PXElectrical Receptacle Connector
- 5940-00-082-4665 MPN MS27249-1B3Terminal Board
- 5940-00-143-4771 MPN MS25063-3Lug Terminal
- 5935-00-177-2035 MPN MS3106E32-17SElectrical Plug Connector
- 5905-00-185-6935 MPN MS35045-98Composition Fixed Resistor
- 5930-00-226-6429 MPN MS39061-4Toggle Switch
- 5935-00-229-2648 MPN MS3106A28-11PElectrical Plug Connector
- 5940-00-236-7176 MPN MS20659-11Lug Terminal
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-288-3764 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9584-18 | Military Standards |