NSN 5306-01-291-0151
Coaxial Connector
Between 1.235 inches and 1.265 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number AIC596-5-13 for national stock number 5306012910151.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-291-0151.
-
MPN or Model
AIC596-5-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.413 inches and 0.463 inches -
Fastener Length
Between 1.235 inches and 1.265 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Head Minor Diameter
Between 0.514 inches and 0.521 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
50.0 rockwell c and 56.0 rockwell c -
Minimum Yield Strength
216000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-047-1002 MPN BACB30LU5-19Close Tolerance Screw
- 5305-01-396-9656 MPN GB511GK4-16Close Tolerance Screw
- 5305-01-462-2693 MPN 3M1034C6-14-51Close Tolerance Screw
- 5305-01-510-6740 MPN ST3M714-7D44Close Tolerance Screw
- 5305-01-539-5809 MPN 3M927-4L16Close Tolerance Screw
- 5306-00-144-0300 MPN MS21250-05044Shear Bolt
- 5306-01-019-9669 MPN VAL23029-3-9Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-291-0151 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC596-5-13 | Sps Technologies, Llc |
C7521-5-13 | Lockheed Martin Corporation |
VS3133-5-13 | Arconic Global Fasteners & Rings, |
H411-5-13 | Huck International, Inc. |
VS3133-5-13 | Tactair Fluid Controls, Inc. |
VCG0009-5-13 | Valley-todeco, Inc. |
PBF7521-5-13 | Sps Technologies, Llc |
120978-5-13 | Sps Technologies, Llc |
120978-5-13 | Sps Technologies, Llc |
H411-5-13 | Huck Intl Inc |
VS3133-5-13 | Alcoa Global Fasteners, Inc. |