NSN 5306-01-291-5683
Coaxial Connector
Between 0.620 inches and 0.650 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number VCG0009-3-5 for national stock number 5306012915683.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-291-5683.
-
MPN or Model
VCG0009-3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.620 inches and 0.650 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Head Minor Diameter
0.456 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Minimum Yield Strength
132000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-049-5664 MPN BACB30LH3-6Close Tolerance Screw
- 5305-01-202-8979 MPN BACB30LK3-7Close Tolerance Screw
- 5305-01-435-3015 MPN BACB30LU5-15Close Tolerance Screw
- 5305-01-517-2195 MPN 3M1169C5-15AClose Tolerance Screw
- 5305-01-535-6807 MPN 3M1170C47AClose Tolerance Screw
- 5306-00-288-2235 MPN VAL23033-3-8Shear Bolt
- 5306-00-722-8197 MPN 123WM10528-1Shoulder Bolt
- 5306-00-817-8222 MPN BACB30LJ12DU20Machine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-291-5683 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0009-3-5 | Valley-todeco, Inc. |
AIC596-3-5 | Sps Technologies, Llc |
120978-3-5 | Sps Technologies, Llc |
PBF7521-3-5 | Sps Technologies, Llc |
C7521-3-5 | Lockheed Martin Corporation |
VS3133-3-5 | Arconic Global Fasteners & Rings, |
H411-3-5 | Huck International, Inc. |
120978-3-5 | Sps Technologies, Llc |
H411-3-5 | Huck Intl Inc |
VS3133-3-5 | Alcoa Global Fasteners, Inc. |
SF118-3-5 | Saturn Fasteners Inc |
VS3133-3-5 | Tactair Fluid Controls, Inc. |