NSN 5306-01-295-1068
Close Tolerance Hex Head Bolt
Between 1.375 inches and 1.422 inches fastener length, double hexagon head style, between 0.200 inches and 0.220 inches head height, width between flats: 0.564 inches .
Manufacturer part number BM17019-6-14 for national stock number 5306012951068.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-295-1068.
-
MPN or Model
BM17019-6-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.577 inches -
Fastener Length
Between 1.375 inches and 1.422 inches -
Head Style
Double hexagon -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-345-1590 MPN LS15265V08-2Close Tolerance Screw
- 5305-01-103-6022 MPN 3M926-3L10Close Tolerance Screw
- 5305-01-364-8276 MPN BACS12FA3K5Machine Screw
- 5305-01-435-5961 MPN BACB30LU7-53Close Tolerance Screw
- 5305-01-492-4568 MPN 3M1170C3-4AFClose Tolerance Screw
- 5305-01-512-8305 MPN TX1024C4-16-6AClose Tolerance Screw
- 5306-00-352-0470 MPN VAL23033-8-18Shear Bolt
- 5306-01-005-0472 MPN VAL23029-4-14Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-295-1068 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM17019-6-14 | Huck International, Inc. |
VS3204-6-14 | Arconic Global Fasteners & Rings, |
VAL23029-6-14 | Valley-todeco, Inc. |
AIC753-6-14 | Sps Technologies, Llc |
PBF1253-6-14 | Sps Technologies, Llc |
S11-1060-6-14 | Sonic Industries Inc. |
109453-6-14 | Sps Technologies, Llc |
MB61-6-14 | Hi-shear Corporation |
ST3M453-6-14 | Boeing Company, The |
ST3M453-6-14 | J M Precision Inc |
ST3M453-6-14 | M.s. Aerospace Inc. |
ST3M453-6-14 | Bor-ca Machine Tool Co |
11825-6-14 | Reid Products Inc. |
ST3M453-6-14 | Alcoa Global Fasteners, Inc. |
MB61-6-14 | Lisi Aerospace Canada Corp |
KS3020-6-14 | Kenaloy Products Inc Sub |
ST3M453-6-14 | Kenaloy Products Inc Sub |
BM17019-6-14 | Huck Intl Inc |
MA5453-6-14 | Abounding Security Inc |
VS3204-6-14 | Alcoa Global Fasteners, Inc. |
ST3M453-6-14 | Abounding Security Inc |