NSN 5306-01-295-4899
Wheel Bolt
Between 5.140 inches and 5.187 inches fastener length, hexagon head style, between 0.390 inches and 0.420 inches head height, width between flats: between 1.053 inches and 1.066 inches .
Manufacturer part number AN12-50A for national stock number 5306012954899.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-295-4899.
-
MPN or Model
AN12-50A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.094 inches and 1.109 inches -
Fastener Length
Between 5.140 inches and 5.187 inches -
Head Style
Hexagon -
Head Height
Between 0.390 inches and 0.420 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 4.046 inches and 4.078 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4037 or steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-164-0244 MPN AN3102A16S6PElectrical Receptacle Connector
- 5935-00-192-1416 MPN AN3108A28-20PElectrical Plug Connector
- 5935-00-201-4651 MPN AN3102E32-12PElectrical Receptacle Connector
- 5935-00-235-8012 MPN AN3102A24-21SElectrical Receptacle Connector
- 5935-00-280-1912 MPN AN3100A28-11SElectrical Receptacle Connector
- 5935-00-283-2916 MPN AN3102A10SL4PElectrical Receptacle Connector
- 5935-00-539-2661 MPN AN3106B32-13SCElectrical Plug Connector
- 5935-01-169-0089 MPN AN3106A12S3PWElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-295-4899 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN12-50A | Aeronautical Standards Group |