NSN 5306-01-296-9833
Wheel Bolt
Between 2.690 inches and 2.750 inches fastener length, hexagon head style, between 0.195 inches and 0.211 inches head height, width between flats: between 0.489 inches and 0.500 inches .
Manufacturer part number 180112 for national stock number 5306012969833.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-296-9833.
-
MPN or Model
180112
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.810 inches and 1.150 inches -
Fastener Length
Between 2.690 inches and 2.750 inches -
Head Style
Hexagon -
Head Height
Between 0.195 inches and 0.211 inches -
Width Between Flats
Between 0.489 inches and 0.500 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.600 inches and 1.880 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Material
Steel -
Material Specification
Gm-280-m 77758 cagec mfr ref single material response or sae j429 gr 5 assn standard single material response -
Surface Treatment
Zinc -
Surface Treatment Specification
G-4342-m 77758 cagec mfr ref single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5945-00-272-3442 MPN 1872005Relay Armature
- 5940-00-353-9669 MPN 1883629Stud Terminal
- 5940-00-503-8207 MPN 76117Terminal Board
- 1680-00-614-9598 MPN 5668537Ballscrew Assembly
- 5930-00-669-7872 MPN 2096008Pressure Switch
- 5930-00-994-9366 MPN 1512473Thermostatic Switch
- 5305-00-010-2619 MPN 102619Setscrew
- 5305-00-011-3256 MPN 113256Drive Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-296-9833 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
180112 | General Motors Llc |
180112 | General Motors Corp |
180112 | General Motors Corp Balance |