NSN 5306-01-298-3118
Wheel Bolt
Between 6.203 inches and 6.250 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN5C61A for national stock number 5306012983118.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-298-3118.
-
MPN or Model
AN5C61A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 5.672 inches and 6.704 inches -
Fastener Length
Between 6.203 inches and 6.250 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 5.672 inches and 6.704 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-241-5474 MPN AN3102A14S5PXElectrical Receptacle Connector
- 5935-00-581-2926 MPN AN3106A18-11SElectrical Plug Connector
- 5935-00-148-9278 MPN UG105UConnector Adapter
- 5305-00-065-5047 MPN AN520B0-6Machine Screw
- 5305-00-144-3815 MPN AN520-10R4Machine Screw
- 5305-00-150-9561 MPN AN509-416R48Machine Screw
- 5305-00-151-0011 MPN AN507H428R22Machine Screw
- 5305-00-151-0732 MPN 505B2R4Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-298-3118 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN5C61A | Aeronautical Standards Group |