NSN 5306-01-300-3311
Close Tolerance Hex Head Bolt
Locking element is plastic per mil-f-18240 and qpl18240;bolt marked with green dye or paint on the thread end.
Manufacturer part number NAS6305L6 for national stock number 5306013003311.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-300-3311.
-
MPN or Model
NAS6305L6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093470 - Bolts/nuts I/s -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
1.251 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
0.497 inches -
Locking Feature
Detent ring threads -
Grip Diameter
0.312 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.803 inches and 0.823 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-008-9400 MPN 12A11951-1Test Adapter Set
- 1560-00-038-5397 MPN 12W6062-194Aircraft Structural Component Bracket
- 5950-00-085-4638 MPN C1021-2Reactor
- 1560-00-169-2003 MPN 12W9991-63Aircraft Streamering
- 1560-00-305-0058 MPN 37P67140-15Tail Pipe Re Insert
- 1560-00-329-3757 MPN 12W6110-830Aircraft Leading Edge
- 1680-00-443-3501 MPN 12C363-803Bell Crank
- 5935-00-449-0041 MPN C2138-9-1Electrical Connector Guide
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-300-3311 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6305L6 | Goldinger, Bernard |
NAS6305L6 | Lockheed Martin Corporation |
NAS6305L6 | Fisher - Fairchild Corporation |
NAS6305L6 | Aero Hardware & Parts Co., Inc. |
NAS6305L6 | Aero Fastener Co., Inc. |
NAS6305L6 | S P I Inc |