NSN 5306-01-300-7703
Close Tolerance Hex Head Bolt
0.500 inches thread diameter, 20 thready qty per inch (tpi), stainless steel material, thread series designator: unjf.
Manufacturer part number 70400-26802-101 for national stock number 5306013007703.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-300-7703.
-
MPN or Model
70400-26802-101
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Length
0.658 inches -
End Application
Sh-60b acft -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-646-1976 MPN JSFB26-4-13Close Tolerance Screw
- 1560-00-065-7133 MPN S6152-62407-2Aft Air Intake Duct
- 1560-00-065-8091 MPN S6122-85100-1Aircraft Ramp Assembly
- 1560-00-088-3135 MPN S6220-61503-12Clip
- 1680-00-171-3349 MPN 65407-05040-042Boom Latch Assy
- 1560-00-334-6401 MPN S1640-63508-1Flig Cable Assembly
- 1680-00-516-1770 MPN S1650-61339Aircraft Seat
- 1560-00-700-3915 MPN S6120-66204Stabili Fairing Tip
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-300-7703 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70400-26802-101 | Sikorsky Aircraft Corporation |
70400-26802-101 | Space-lok, Inc. |
AS616-101 | Avibank Mfg., Inc. |
AS422-101 | Avibank Mfg., Inc. |
SL8163-101 | Space-lok, Inc. |
Stock Check
- NE: 1
- NS: 1