NSN 5306-01-301-1330
Coaxial Connector
Between 1.190 inches and 1.210 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: 0.561 inches .
Manufacturer part number 76683-5-8 for national stock number 5306013011330.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-301-1330.
-
MPN or Model
76683-5-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.690 inches and 0.710 inches -
Fastener Length
Between 1.190 inches and 1.210 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
0.561 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel -
Material Specification
Mil-s-5000 military specification single material response or ams 6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii federal specification single treatment response -
Thread Series Designator
Uns
More from these suppliers
- 5305-00-017-5131 MPN 3M123-3-6Close Tolerance Screw
- 5305-00-126-7640 MPN 66584-08-8Machine Screw
- 5305-00-505-4141 MPN LS15237C4-20Close Tolerance Screw
- 5305-00-889-6863 MPN NAS1203-16Close Tolerance Screw
- 5305-00-926-5536 MPN NAS1190C08P6LSocket Head Cap Screw
- 5305-00-969-4752 MPN 61688-008Socket Head Cap Screw
- 5305-00-971-7499 MPN C082-3-4Machine Screw
- 5305-01-015-3339 MPN NAS1189E04P56Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-301-1330 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
76683-5-8 | Sps Technologies, Llc |
Stock Check
- NE: 4
- NS: 8