NSN 5306-01-301-3755
Close Tolerance Hex Head Bolt
Between 1.420 inches and 1.450 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: 0.650 inches .
Manufacturer part number AN176C13A for national stock number 5306013013755.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-301-3755.
-
MPN or Model
AN176C13A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.629 inches -
Fastener Length
Between 1.420 inches and 1.450 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
0.650 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.791 inches and 0.821 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Stainless steel -
Thread Series Designator
Unf -
Specification Data
88044-an176 government standard
More from these suppliers
- 5945-00-323-1917 MPN AN3337-1Electromagnetic Relay
- 5935-00-500-5559 MPN AN3108B32-8SElectrical Plug Connector
- 5935-01-249-2584 MPN AN3106A28-15SWElectrical Plug Connector
- 5935-00-148-9359 MPN AN3108B12S4PElectrical Plug Connector
- 5935-00-222-7781 MPN AN3106B20-21PElectrical Plug Connector
- 5305-00-144-3901 MPN AN500A416-14Machine Screw
- 5305-00-151-2906 MPN AN526-1024-10Machine Screw
- 5305-00-156-2308 MPN AN500AB8-4Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-301-3755 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN176C13A | Aeronautical Standards Group |