NSN 5306-01-303-7618
Wheel Bolt
2.550 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number 75D111252-2099 for national stock number 5306013037618.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-303-7618.
-
MPN or Model
75D111252-2099
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
2.300 inches -
Fastener Length
2.550 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Shank Unthreaded Hole Diameter
0.188 inches all holes -
End Application
Aircraft model av-8b -
Thread Diameter
0.500 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.140 inches second hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-039-5095 MPN 53-32522-15Aircraft Skin
- 1560-00-073-1494 MPN 53-39074-2Radome Fitting Assembly
- 1560-00-138-7862 MPN 32-12003-23Structural Angle Clip
- 1560-00-185-3328 MPN 32-30362-1Bracket Assembly
- 1560-00-222-3877 MPN 53-33525-4Radome
- 1560-00-264-0773 MPN 32-32080-115Aircraft Skin
- 1560-00-264-1530 MPN 68A324700-2037Aircraft Skin
- 1560-00-473-4242 MPN 32-18518-302Aileron Rib
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-303-7618 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
75D111252-2099 | Boeing Company, The |
75D111252-2099 | Boeing Company, The |