NSN 5306-01-303-9143
Coaxial Connector
Between 0.751 inches and 0.781 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number NAS6706U15 for national stock number 5306013039143.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-303-9143.
-
MPN or Model
NAS6706U15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 0.751 inches and 0.781 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Single Shear Strength
95000 pounds per square inch -
Thread Diameter
0.375 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas6706 professional/industrial association standard
More from these suppliers
- 5940-01-439-4148 MPN NAS1063A6-510BJTerminal Board Marker Strip
- 5305-00-047-2346 MPN NAS1124-4Close Tolerance Screw
- 5305-00-054-4935 MPN NAS1300-3T12Thumbscrew
- 5305-00-071-2536 MPN MS24694S190Machine Screw
- 5305-00-079-1749 MPN MS24694S29Machine Screw
- 5305-00-144-0399 MPN MS35307-383Hexagon Head Cap Screw
- 5305-00-182-7475 MPN NAS1352-4LB14PSocket Head Cap Screw
- 5305-00-182-9482 MPN MS27039-0835Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-303-9143 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6706U15 | National Aerospace Standards |
Stock Check
- NS: 18
- NE: 1832