NSN 5306-01-304-3576
Shouldered Rivet Ring Bolt
About this product
Between 0.313 inches and 0.316 inches eye inside diameter, 0.094 inches shoulder thickness, between 0.703 inches and 0.750 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN45C5A for national stock number 5306013043576.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-304-3576.
-
MPN or Model
AN45C5A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.515 inches and 0.562 inches -
Eye Inside Diameter
Between 0.313 inches and 0.316 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 0.703 inches and 0.750 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.688 inches -
Overall Length
Between 1.641 inches and 1.688 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 1.297 inches and 1.344 inches -
Eye Outside Width
0.688 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-051-6719 MPN MS3212-2Machine Screw
- 5305-00-053-1082 MPN MS35199-46Machine Screw
- 5305-00-058-2067 MPN NAS135206H6PSocket Head Cap Screw
- 5305-00-068-1655 MPN NASM51045-20Setscrew
- 5305-00-082-1675 MPN NAS603-23PMachine Screw
- 5305-00-151-5664 MPN NAS560HK2P11Machine Screw
- 5305-00-194-5662 MPN NAS1101E06-10BMachine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-304-3576 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN45C5A | National Aerospace Standards |
AN45C5A | Aeronautical Standards Group |
Stock Check
Availability for this item was last checked on 07/28/22.
The quantities and conditions available at the time were:
- NE: 982
- NS: 42