NSN 5306-01-304-4453
Coaxial Connector
1.212 inches fastener length, double hexagon w/hole head style, 0.348 inches head height, width between flats: between 0.368 inches and 0.377 inches .
Manufacturer part number EWB0420-5H-10 for national stock number 5306013044453.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-304-4453.
-
MPN or Model
EWB0420-5H-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.587 inches -
Fastener Length
1.212 inches -
Head Style
Double hexagon w/hole -
Head Height
0.348 inches -
Width Between Flats
Between 0.368 inches and 0.377 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
0.082 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Thread Diameter
0.312 inches -
Grip Length
0.625 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-948-8148 MPN 32-50071-9Engine Mounting Bolt
- 5305-00-089-0120 MPN NAS1190C08P8LSocket Head Cap Screw
- 5305-00-205-3674 MPN NAS1189E06P4LSocket Head Cap Screw
- 5305-00-324-8543 MPN 110179-4-5Close Tolerance Screw
- 5305-00-347-7840 MPN LS15265V3-17Close Tolerance Screw
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-00-472-2972 MPN 38030-96C8DSocket Head Cap Screw
- 5305-00-539-5342 MPN HT4025L4-12Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-304-4453 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB0420-5H-10 | Sps Technologies, Llc |
EWB0420H5-10 | Sps Technologies, Llc |