NSN 5306-01-305-6769
Coaxial Connector
5.126 inches fastener length, dished hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: 0.934 inches .
Manufacturer part number 8934660 for national stock number 5306013056769.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-305-6769.
-
MPN or Model
8934660
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Fastener Length
5.126 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
0.934 inches -
Thread Diameter
0.625 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-014-8645 MPN 7331176-02Boom Leg
- 4920-01-109-4949 MPN 8041653Hydraulic Chuck
- 1560-01-200-0044 MPN 7433999-01Aircraft Structural Component Support
- 1560-01-248-5537 MPN 8612558-10Aircraft Structural Component Support
- 5985-01-359-0318 MPN 912665-30Antenna Group
- 1560-01-448-4025 MPN 68A321452-2172Aircraft Structural Component Support
- 4920-01-158-5475 MPN 8222870Machine Master Ring
- 4920-01-212-2712 MPN X8324255Clamp Weld
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-305-6769 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8934660 | Warner Robins Air Logistics Center |