NSN 5306-01-307-7045
Close Tolerance Hex Head Bolt
Between 1.641 inches and 1.671 inches fastener length, flat countersunk head style, 0.8884 inches head diameter, grip diameter: between 0.4516 inches and 0.4526 inches .
Manufacturer part number NAS1707-16 for national stock number 5306013077045.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-307-7045.
-
MPN or Model
NAS1707-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.656 inches -
Fastener Length
Between 1.641 inches and 1.671 inches -
Head Style
Flat countersunk -
Head Diameter
0.8884 inches -
Grip Diameter
Between 0.4516 inches and 0.4526 inches -
Thread Diameter
0.4375 inches -
Grip Length
Between 0.9900 inches and 1.0100 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification 1st treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1707 professional/industrial association standard
More from these suppliers
- 5305-00-003-9326 MPN NAS6002U16Machine Screw
- 5305-00-007-1559 MPN NAS1100E04-16PMachine Screw
- 5305-00-008-7864 MPN NAS1631C2Machine Screw
- 5305-00-018-7514 MPN NAS1220-5E10Machine Screw
- 5305-00-054-8291 MPN MS21295-65Socket Head Cap Screw
- 5305-00-059-4857 MPN NAS1101-02-5Machine Screw
- 5305-00-144-0362 MPN MS24694C135Machine Screw
- 5305-00-144-0428 MPN NAS1352-12LE48PSocket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-307-7045 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1707-16 | National Aerospace Standards |