NSN 5306-01-308-2849
Coaxial Connector
Between 1.285 inches and 1.315 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30NF4D14 for national stock number 5306013082849.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-308-2849.
-
MPN or Model
BACB30NF4D14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.285 inches and 1.315 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2481 inches and 0.2487 inches -
Single Shear Strength
95000 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 -
Material Specification
Mil-s-5000 assn standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas6604d14 professional/industrial association standard
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-707Terminal Board Marker Strip
- 5935-01-591-8613 MPN AS85049/38-13WElectrical Connector Backshell
- 5940-01-657-2412 MPN NAS1063B1-03Terminal Board Marker Strip
- 5305-00-005-5809 MPN NAS1631E3Machine Screw
- 5305-00-042-9477 MPN MS90725-91Hexagon Head Cap Screw
- 5305-00-043-0410 MPN NAS1123-1HClose Tolerance Screw
- 5305-00-045-7943 MPN MS35198-5Machine Screw
- 5305-00-052-6682 MPN MS35198-32Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-308-2849 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF4D14 | The Boeing Company |
NAS6604D14 | National Aerospace Standards |