NSN 5306-01-308-6044
Coaxial Connector
Between 3.224 inches and 3.254 inches fastener length, dished hexagon head style, between 0.625 inches and 0.640 inches head height, width between flats: between 1.614 inches and 1.627 inches .
Manufacturer part number NAS1118-38 for national stock number 5306013086044.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-308-6044.
-
MPN or Model
NAS1118-38
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.864 inches -
Fastener Length
Between 3.224 inches and 3.254 inches -
Head Style
Dished hexagon -
Head Height
Between 0.625 inches and 0.640 inches -
Width Between Flats
Between 1.614 inches and 1.627 inches -
Grip Diameter
Between 1.123 inches and 1.124 inches -
Thread Diameter
1.125 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1118 professional/industrial association standard
More from these suppliers
- 5935-00-137-0932 MPN NAS1666-18Electrical Connector Cable Clamp
- 5940-01-625-6047 MPN NAS1063C6-1Terminal Board Marker Strip
- 5305-00-003-9278 MPN NAS1221-4E42Machine Screw
- 5305-00-008-9058 MPN NAS1102C04-3PMachine Screw
- 5305-00-021-7334 MPN MS21295-37Socket Head Cap Screw
- 5305-00-057-0509 MPN MS51958-12Machine Screw
- 5305-00-057-2601 MPN MS51038-129Setscrew
- 5305-00-058-2068 MPN MS24677-10Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-308-6044 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1118-38 | National Aerospace Standards |