NSN 5306-01-309-0884
Coaxial Connector
Oversize shank for repair work only.
Manufacturer part number NAS6212-28X for national stock number 5306013090884.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-309-0884.
-
MPN or Model
NAS6212-28X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 2.401 inches and 2.431 inches -
Fastener Length
Between 2.339 inches and 2.369 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.7636 inches and 0.7646 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.107 inches first hole and 2.157 inches first hole -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6212 professional/industrial association standard
More from these suppliers
- 5940-01-451-2581 MPN NAS1063A6-510AZTerminal Board Marker Strip
- 5935-01-373-0503 MPN SAE AS 85049AElectrical Connector Retaining Plate
- 5305-00-004-5067 MPN NAS1189E3P8KSocket Head Cap Screw
- 5305-00-008-5908 MPN NAS1189E04T4BSocket Head Cap Screw
- 5305-00-058-9359 MPN MS51977-10Setscrew
- 5305-00-061-5019 MPN NAS1206-26Close Tolerance Screw
- 5305-00-068-0502 MPN NASM90725Hexagon Head Cap Screw
- 5305-00-079-7961 MPN MS24694S209Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-309-0884 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6212-28X | Satair Usa, Inc. |
NAS6212-28X | National Aerospace Standards |
NAS6212-28X | Aero Hardware & Supply Inc. |