NSN 5306-01-309-6510
Coaxial Connector
Between 1.377 inches and 1.407 inches fastener length, spline drive shear head head style, 0.210 inches head height, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number H411-6-15 for national stock number 5306013096510.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-309-6510.
-
MPN or Model
H411-6-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.479 inches -
Fastener Length
Between 1.377 inches and 1.407 inches -
Head Style
Spline drive shear head -
Head Height
0.210 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
Between 0.578 inches and 0.585 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-536-7092 MPN ST3M454-4L9Close Tolerance Screw
- 5305-01-435-3851 MPN BACB30LU7-33Close Tolerance Screw
- 5305-01-660-9909 MPN LD111-0045-2319Close Tolerance Screw
- 5306-00-723-9583 MPN 3P23030-101Machine Bolt
- 5306-00-958-9326 MPN MS21250-04022Shear Bolt
- 5306-01-141-7882 MPN VAL23608-6-1Shoulder Bolt
- 5306-01-142-4408 MPN VAL23608-3-32Shoulder Bolt
- 5306-01-171-8097 MPN VAL23029-6-10Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-309-6510 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H411-6-15 | Huck International, Inc. |
VS3133-6-15 | Arconic Global Fasteners & Rings, |
VCG0009-6-15 | Valley-todeco, Inc. |
PBF7521-6-15 | Sps Technologies, Llc |
C7521-6-15 | Lockheed Martin Corporation |
C7521-6-15 | Sps Technologies, Llc |
C7521-6-15 | Alcoa Global Fasteners, Inc. |
AIC596-6-15 | Sps Technologies, Llc |
120978-6-15 | Sps Technologies, Llc |
H411-6-15 | Huck Intl Inc |
VCG009-6-15 | Valley-todeco, Inc. |
VS3133-6-15 | Alcoa Global Fasteners, Inc. |