NSN 5306-01-309-7706
Shouldered Rivet Ring Bolt
About this product
Between 0.375 inches and 0.378 inches eye inside diameter, 0.094 inches shoulder thickness, between 0.687 inches and 0.734 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN46-C5A for national stock number 5306013097706.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-309-7706.
-
MPN or Model
AN46-C5A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.641 inches -
Eye Inside Diameter
Between 0.375 inches and 0.378 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 0.687 inches and 0.734 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.750 inches -
Overall Length
1.672 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
1.297 inches -
Eye Outside Width
0.750 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-008-5895 MPN NAS1102-06-14BMachine Screw
- 5305-00-052-4261 MPN NAS1207-38Close Tolerance Screw
- 5305-00-057-9611 MPN MS24621-28Tapping Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-113-3733 MPN NAS560CK3-7Machine Screw
- 5305-00-193-5231 MPN NAS1741C04R5Socket Head Cap Screw
- 5305-00-208-6176 MPN MS24677-78Socket Head Cap Screw
- 5305-00-225-9099 MPN MS90726-44Hexagon Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-309-7706 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN46-C5A | National Aerospace Standards |
AN46-C5A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.