NSN 5306-01-310-5245
Wheel Bolt
Between 2.140 inches and 2.187 inches fastener length, hexagon head style, between 0.296 inches and 0.328 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number AN9CH20A for national stock number 5306013105245.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-310-5245.
-
MPN or Model
AN9CH20A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.874 inches and 0.953 inches -
Fastener Length
Between 2.140 inches and 2.187 inches -
Head Style
Hexagon -
Head Height
Between 0.296 inches and 0.328 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 1.234 inches and 1.266 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-259-2714 MPN AN3100A22-10PElectrical Receptacle Connector
- 5935-01-067-7920 MPN AN507-8-32R12Electrical Receptacle Connector
- 5305-00-145-7045 MPN AN515-516-8Machine Screw
- 5305-00-264-2368 MPN AN515C8-24Machine Screw
- 5305-00-271-3634 MPN AN507B1032R8Machine Screw
- 5305-00-325-2461 MPN AN525-10R30Machine Screw
- 5305-00-720-8051 MPN AN509-10-7Machine Screw
- 5305-00-761-3827 MPN AN565A624HI4Setscrew
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-310-5245 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN9CH20A | Aeronautical Standards Group |