NSN 5306-01-311-9903
Wheel Bolt
Make from ms9147-06.
Manufacturer part number 8930373-01 for national stock number 5306013119903.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-311-9903.
-
MPN or Model
8930373-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093470 - Bolts/nuts I/s -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.300 inches and 0.320 inches -
Fastener Length
Between 0.300 inches and 0.320 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.320 inches and 0.340 inches -
Width Between Flats
0.308 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Hole Diameter
Between 0.045 inches and 0.049 inches -
End Application
Lower bearing, c5a/b -
Thread Diameter
0.250 inches -
Hole Quantity
2 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Double hexagon longitudinal hole -
Material
Steel -
Material Specification
Ams6322-80 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, class 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-500-8083 MPN 9452180-13Electrical Connector Cover
- 5975-01-501-0993 MPN 9452892Flexible Nonmetallic Conduit
- 1560-01-591-8331 MPN 162D611514-1001Aircraft Structural Panel
- 1560-01-607-6913 MPN 160D217024-584Explosion Suppressant Foam Segment
- 1560-01-619-6475 MPN 160D217008-219Filler Void
- 1560-01-068-4166 MPN 160D11608-15Aircraft Structural Component Fitting
- 1560-01-591-6881 MPN 162D612501-1011Aircraft Access Door
- 1560-01-622-7158 MPN 162D712512-2003Aircraft Structural Component Fitting
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-311-9903 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8930373-01 | Ogden Air Logistics Center |